Published Technical Pages

“Type 1 Mastics: What To Look For” Published by Tile & Decorative Surfaces Magazine, Sept, 1989

“Steam Room Construction” An open paper submitted to Qualicer 92 International Ceramic Tile Symposium held in Castellon, Spain. The paper was adopted and presented by the director of The Tile Council of America.

“Resolving Major Substrate Problems in a Midwest Shopping Mall” published by Tile World Magazine, Jan/Feb 1993

“The Most Common Tile Contractor/Tilesetter Errors That Cause Installation Failures” published by The National Tile Contractors Association TileLetter, Feb. 1998

“Building Movement = Cracked Or Loose Tile: This Equation Can Be Changed” published by The NTCA TileLetter, May, 2002″

“Coverage! Coverage! coverage” published by The NTCA TileLetter, May, 2002

“Sub-floor Problems” published by The NTCA TileLetter, July, 2003

“Want to Reduce The Risk of Installation Failures? Let The New ISO Standards be Your Guide” published by the NTCA Tile Letter , November, 2011

“Steam Room Construction” published by TADA magazine, June 2012

“The Non-bonded, Open Joint Alternative” published by the NTCA Tile Letter, March 2012

“Steam Room Construction” published by TADA magazine, June 2012

“ANSI Requirements for Porcelain Tile Shears are too Low” published by NTCA Tile Letter magazine, June 2014

“Encountering Steel Trowel-finished Concrete Floors That do not Have a Fine Broom Finish” published by the NTCA Tile Letter magazine, August, 2015.